Cerakote Glass Coat Application Video

1. Apply Step 1 Glass Cleaner Wipe onto clean window, scrubbing thoroughly. Use 1 wipe per each half of windshield.

2. Allow Glass Cleaner to sit for 2 minutes.

3. Rinse extremely well with running water, ensuring no cleaner is left on window or surrounds surfaces.

Note: If Step 1 Cleaner gets on anything but glass, don't worry. Just wipe it off immediately with a clean, damp cloth.

4. Dry Glass completely. Any water present will negatively affect coating.

5. Dispense enough Step 2 Ceramic Glass Coating along the entire length of the provided Microfiber Applicator Sponge to saturate the surface. Apply the coating, using a cross hatch (#) pattern, first using vertical lines, then horizontal lines. Dispense additional coating onto the Applicator Sponge as needed, ensuring the applicator stays wet until the entire windshield is coated.

6. Allow coating to cure for 5-10 minutes.

7. Buff off with the provided finishing towel, switching sides of the towel to completely buff the glass clean.

Note: If Step 2 Glass Ceramic gets on anything but glass, don't worry, just wipe it off immediately with a clean, DRY towel.

8. DO NOT expose to moisture for at least 1 hour. Allow 24 hours before washing.