• Cerakote LR-100 LR Black Main
  • Cerakote LR-100 LR Black YouTube Color Sample
  • Cerakote LR-100 & LR-200 Black Example
  • Cerakote LR-100 LR Black Reflectance Graph
  • Cerakote LR-100 LR Black Customer Sample

CERAKOTE

LR-100 | LR Black

€39,00
€39,00
€330,51 l
Shipping will be calculated at checkout

The prices include import duties and handling, but exclude the VAT applicable in your country.

  • American Express
  • Apple Pay
  • EPS
  • Google Pay
  • Maestro
  • Mastercard
  • PayPal
  • Union Pay
  • Visa
  • Official Distributor
  • Worldwide Sale & Shipping
  • 1-5 Days Express Shipping

Documents

Safety Data Sheet
Application Guide

Questions about the product?

We are happy to help.

  • Low Reflection

Cerakote's unique inorganic LR-100 LR Black is a low-reflective, light-absorbing black coating specifically designed for the absorption of wavelengths in the visible light spectrum. This coating is ideal for all non-reflective surfaces, such as satellites, optics, sensors, medical devices, and much more. Additionally, it meets the Cerakote standard for mechanical durability, making it one of the most resilient non-reflective coatings on the market.

  • Complies with ASTM E595-15
  • Resistant to atomic oxygen
  • UV-stable surface
  • Low-reflective and light-absorbing surface for the visible light spectrum

CURE NOTE: For full curing, LR-100 must first be baked in an oven at 80°C for one hour and then cured at room temperature for 24 hours.

Heat resistance
Chemical resistance
Corrosion protection
UV protection

Technical Data

Filter sieve

150 (Artikel SE-276)

Drying

Oven Curing

Drying Plan

80°C for 15 minutes, then 24 hours at room temperature

Layer thickness

25 µm

Gloss Level

1 GU

Density

1.53 g/ml

Proportion of solid components

61%

Viscosity

217 cP

Hardness Grade Gouge (ASTM D3363)

2H

Scratch Hardness (ASTM D3363)

2H

Crosscut Adhesion (ASTM D3359)

5B

Flexibility (Mandrel Bend ASTM D522)

99%

Impact Performance Direct/Indirect (ASTM D2794)

13.56 Nm / 13.56 Nm

Color Stability (max. Temperature)

up to 760°C

Temperature Stability (max.)

up to 760°C

Testing procedures

All results are based on blasted steel coated with the recommended film thickness and cured according to the recommended curing cycle.

Gloss levels are measured at a 60° angle. Deviations from the recommended conditions lead to different results. Gloss is influenced by the quality of pretreatment and the spraying technique.

Viscosity measured under ambient conditions (air temperature, relative humidity) at the time of manufacture.

Recommended curing temperature:

  • Please refer to the curing cycle specifications provided for each Cerakote product.

The maximum temperature is the temperature up to which the paint or coating remains stable.

Chemical resistance testing: The results refer to color changes according to the CIE76 formula. The results range from:

  • Excellent: ∆E change <2.5 (★★★★)
  • Good: ∆E change <3.0 (★★★☆)
  • Satisfactory: ∆E change <3.5 (★★☆☆)
  • Poor: ∆E change <4.0 (★☆☆☆)

The test parameters are as follows:

  • Hardness or pencil hardness tests are measured from soft to hard as follows: 9B, 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H. 9H is the highest hardness level.
  • SG-100 only: Hardness test Method A — An X-cut is made through the coating down to the substrate; a self-adhesive tape is applied over the cut and then removed. Adhesion is qualitatively rated on a scale from 0 to 5.
  • Adhesion is measured on a scale from 0B, 1B, 2B, 3B, 4B, 5B, with 5B being the highest achievable rating.
  • Flexibility or bend test on a conical mandrel: “100% resistance” is the highest achievable rating and means the coating showed no cracks or flaking.
  • Impact resistance (direct/indirect) is measured on a scale from 0 Nm to 18.08 Nm, with 18.08 Nm being the highest achievable rating.
LR-100 | LR Black

€39,00

In-house production

Call us or send us an email if you are interested in implementing Cerakote coating solutions in your company. We are happy to advise you and provide you with all the necessary information.

Outsourcing

If you have your parts manufactured or externally coated by a manufacturer, ask them about Cerakote options for your parts. If they do not offer Cerakote coating, feel free to contact us. We are happy to connect you with one of our certified coaters across Europe.

Call us

If you have any questions or are unsure whether Cerakote is the right application for you, just call us at +49(0)4106-6414121 or send us an email at info@pbncoatings.de.