CIR-600 | Gen II MagPul Flat Dark Earth P3

Gen II coatings are available to all US customers. Outside the USA, we require an authorization letter from the military or law enforcement agency of your country.

Official Distributor
Worldwide Sale & Shipping
1-5 Days Express Shipping

Documents

Safety Data Sheet

Application Guide

Catalyst Mixing Calculator

Are you interested in this product?

Directly from the official distributor

For over 20 years, PBN Coatings has been the official distributor of the CERAKOTE brand.

PFAS-free
Orange
bestseller

Burnt Orange is a pumpkin orange solid color with a matte finish.

NOTE: This product comes with a hardener and requires a 150 mesh screen (SE-276).

The F-Series is the world's highest-performing PFAS-free thin-film ceramic coating.

The F-Series was specifically developed for high-volume production and manufacturing due to its fast cure time at low temperatures . It is an oven-curing, two-component coating that is applied directly to the substrate. F-Series has all the properties you know and expect from Cerakote. It features unsurpassed corrosion and chemical resistance , excellent adhesion and flexibility , and exceptional hardness, durability , and wear resistance .

The F-Series is:

PFAS-free
Fast curing - cures in 15 minutes at 120°C
- or curing at 80°C for 1 hour in the paint booth
- can cure large parts quickly
Large volume/production-friendly
- reduces bottlenecks
- achieves higher parts throughput
- saves time and energy costs
- increases your company's revenue

Heat resistance

Chemical resistance

Corrosion protection

UV protection

Technical Data

Filter sieve	150 (Artikel SE-276)
Drying	Air Curing
Drying Plan	120°C for 2 hours
Layer thickness	25 µm
Gloss Level	14 OU
Density	1.03 g/ml
Proportion of solid components	51%
Viscosity	11.9 cP
Hardness Grade Gouge (ASTM D3363)	4H
Scratch Hardness (ASTM D3363)	4H
Crosscut Adhesion (ASTM D3359)	5B
Flexibility (Mandrel Bend ASTM D522)	99%
Impact Performance Direct/Indirect (ASTM D2794)	4.52 Nm / 2.26 Nm
Color Stability (max. Temperature)	up to 150°C
Temperature Stability (max.)	up to 1000°C

Testing procedures

All results are based on blasted steel coated with the recommended film thickness and cured according to the recommended curing cycle.

Gloss levels are measured at a 60° angle. Deviations from the recommended conditions lead to different results. Gloss is influenced by the quality of pretreatment and the spraying technique.

Viscosity measured under ambient conditions (air temperature, relative humidity) at the time of manufacture.

Recommended curing temperature:

Please refer to the curing cycle specifications provided for each Cerakote product.

The maximum temperature is the temperature up to which the paint or coating remains stable.

Chemical resistance testing: The results refer to color changes according to the CIE76 formula. The results range from:

Excellent: ∆E change <2.5 (★★★★)
Good: ∆E change <3.0 (★★★☆)
Satisfactory: ∆E change <3.5 (★★☆☆)
Poor: ∆E change <4.0 (★☆☆☆)

The test parameters are as follows:

Hardness or pencil hardness tests are measured from soft to hard as follows: 9B, 8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H. 9H is the highest hardness level.
SG-100 only: Hardness test Method A — An X-cut is made through the coating down to the substrate; a self-adhesive tape is applied over the cut and then removed. Adhesion is qualitatively rated on a scale from 0 to 5.
Adhesion is measured on a scale from 0B, 1B, 2B, 3B, 4B, 5B, with 5B being the highest achievable rating.
Flexibility or bend test on a conical mandrel: “100% resistance” is the highest achievable rating and means the coating showed no cracks or flaking.
Impact resistance (direct/indirect) is measured on a scale from 0 Nm to 18.08 Nm, with 18.08 Nm being the highest achievable rating.

How can I apply Cerakote coating?

How can the different parts and applications be coated with Cerakote?

In-house production

Call us or send us an email if you are interested in implementing Cerakote coating solutions in your company. We are happy to advise you and provide you with all the necessary information.

Outsourcing

If you have your parts manufactured or externally coated by a manufacturer, ask them about Cerakote options for your parts. If they do not offer Cerakote coating, feel free to contact us. We are happy to connect you with one of our certified coaters across Europe.

Call us

If you have any questions or are unsure whether Cerakote is the right application for you, just call us at +49(0)4106-6414121 or send us an email at info@pbncoatings.de.

LANGUAGE

COUNTRY/REGION